SCAT VW- Hi-Lift Rocker Arms
|
PRO-COMP 765 SCAT FORGED
4130 CHROMOLY ROCKERS ASSEMBLIES |
BILLET
4130 Stronger diameter shaft (.765) with bolt-on aluminum end caps |
Forged
Rocker Arms with Steel backed bronze bushings and flame hardened tips |
Race Proven
to be 50% stronger than (.687" I.D.) needle bearing type rocker assemblies
|
INCREASE
VALVE LIFT WITHOUT CHANGING CAMSHAFT |
Chromoly
mounting studs, adjusting screws and lash caps |
Rocker Assemblies
- Sold In Pairs |
PART
NO. |
DESCRIPTION |
PRICE |
20196 |
Racing Forged
1.25 Ratio - Increases Valve Lift 20% |
$202 |
20195 |
Racing Forged
1.40 Ratio - Increases Valve Lift 30% |
$202 |
Components |
20196-1V |
1.25 Chromoly
Ratio Rocker Arm only 20248 = Adjusting Screw with Nut |
$32 |
20195-1 |
1.40 Chromoly
Ratio Rocker Arm only 20249 = End Cap with Bolt |
$32 |
20197 |
Chromoly Mounting
Stud |
$17 |
20198 |
Cup Adjusting
Screws |
$14 |
20200 |
Adjusting Shims,
8 Pcs |
$7 |
PRO-STREET 707 VW FORGED
ROCKER ARM ASSEMBLIES - NEW |
1.25 Ratio
Rocker Arms are Made By SCAT From 4130 Chromoly |
Kits includes:
Forged Rocker Arms, Billet Rocker Shaft Kit, Mounting Blocks, Swivel Adjusting
Screws Geometry Pads and Shims |
PART
NO. |
DESCRIPTION |
PRICE |
20130 |
1.10 Ratio OEM
Rocker Arm Assembly |
$105 |
20188S |
1.25 Ratio 4130
Chromoly Rocker Arm Assembly - 12% more horsepower, torque and camshaft
lift |
$122 |
DRY OIL COATED 707 CHROMOLY
BOLT ON ROCKER SHAFT KIT - MADE IN USA |
Ideal
For Standard, Chromoly Forged 1.25 Rockers with .707" I.D. |
Billet
4130 shaft is center-less ground to exacting tolerances |
6061-T6
Center Spacer and End Caps along with Shims + Hardware |
Rocker
Shafts are Dry Oil Coated & Super Grooved for Positive Lubrication at
all times |
PART
NO. |
DESCRIPTION |
PRICE |
20129 |
Rocker Shaft
Kit |
$39 |
20201 |
.015" Rocker
Arm Shims Set of 8 |
$7 |
20202 |
.030" Rocker
Arm Shims, Set of 8 |
$6 |
20203 |
.060" Rocker
Arm Shims, Set of 8 |
$6 |
PRO-STREET FORGED 1.25
& 1.10 RATIO 707 ROCKER ARMS |
1.25 Ratio
Chromoly Rockers are Made By Scat with the Genuine Look |
Performance
Rockers at a Economical Price |
Used With
SCAT Big Foot Swivel Adjusting Screws (P/N 20248) |
PART
NO. |
DESCRIPTION |
PRICE |
20188 |
1.25:1 Chromoly
Ratio Forged VW Rocker Arms, Set of 8 |
$94 |
20131 |
1.10:1 Genuine
VW Rocker Arms, Set of 8 |
$65 |
BIG FOOT SWIVEL ADJUSTING
SCREWS |
Use with
VW Type 1-3 stock or 1.25 ratio VW Rocker Arms |
OVER ALL
SPRING LENGTH (OUTER = 2.400") (INNER = 2.025") |
Swivel
foot eliminates valve stem end wear due to high lift cam and heavy spring
pressures |
Super
strong - heat treated for strength and reliability |
Internal
Oil Passage lubricates ball & valve stem |
Set of
8 pieces includes four (4) .060"/1.52mm SCAT Rocker Arm Pads for correct
rocker arm geometry |
PART
NO. |
DESCRIPTION |
PRICE |
20118 |
Swivel Adjusting
Screws, Set |
$21 |
20118-200 |
Swivel Adjusting
Screws, 200 Pieces Bulk |
$366 |
SCAT ROCKER ARM GEOMETRY
TYPE I-III PADS |
For use
in obtaining correct rocker arm geometry when using cylinder spacers,
different length pushrods and swivel adjusting screws - 4 piece set |
Full size
pads fit beneath and support rocker arm blocks |
PART
NO. |
DESCRIPTION |
PRICE |
20126 |
.015"/38mm |
$7 |
20127 |
.030"/76mm |
$7 |
20128 |
.060"/1.52mm |
$7 |
|
|