| FEATURES INCLUDE: |
| • Bullet-Proof
design — Solid Main Webs |
| • Six (6) hollow dowels
guard against case halves moving and distorting main bores |
| • Eliminate engine vibrations
and bearing wear |
| • Six (6)
4130 Chromoly Steel 7/16" Diameter Thru Studs hold together the case halves |
| • Used by
the World�s fastest VW racers such as Dave Perkins, Pro-Turbo; Mike Stewin,
Pro-Stock |
| • 3 Piece
design with integral bellhousing and removable front cover for cam timing
adjustment |
| • Extra
large 1/2" oil galleys for positive oiling under hard racing conditions |
| • Clearanced
for STROKE crankshafts up to 90mm |
| • 90.5mm
to 101.6mm bore kits |
| • Wet sump
case features A 4-1/2" quart removable oil pan with external Sump oil
pick-up |
| CASE TYPE: DRY
SUMP (22) OR 4-1/2" QUART WET SUMP (23) |
| MAIN JOURNAL
SIZE: VW TYPE I, TYPE 4 CENTER, ALL TYPE 4 CASE BORE SIZES: 92mm thru
101.6mm |
| FLYWHEEL ATTACHMENT:
DOWEL PIN OR FLANGE |
| CASE ACCESSORIES & REPLACEMENT
PARTS |
| PART
NO. |
DESCRIPTION |
PRICE |
| 22001 |
7/16"-20
4130 Chromoly Case Through Stud with Nut & Washer |
$25 |
| 22002 |
Hollow Dowel
Pin for Case half Alignment .550" OD |
$9 |
| 22003 |
Main Bearing
Dowel Pins, Set of 5 Pcs |
$8 |
| 22004 |
Hollow Dowel
Pin for Front Cover Alignment |
$8 |
| 22005 |
Front Seal &
O-Ring for use with SCAT Pulley |
$15 |
| 22008 |
10mm 4130 Chromoly
Cylinder Head Studs w/Nut & Washer VW Dual Port Head to SCAT KILLER Case,
Set of 16 Pcs |
$123 |
| 22010 |
10mm 4130 Chromoly
Cylinder Head Studs w/Nut & Washer SCAT Split-Port Heads to SCAT KILLER
Case, Set of 16 Pcs (Extra-long custom length cylinders requires special
length studs) |
$17 |
| 22309 |
Cast Aluminum
Center Mount Alt/Gen Tower |
$77 |
| 22310 |
Center Mount
Aluminum Fan Housing |
$282 |
| 80181 |
Sand Seal Pulley
5-3/8" w/Belt Groove fits SCAT KILLER or VW Case |
$33 |
| 80251 |
Sand Seal Pulley
5-3/8" w/o Belt Groove fits SCAT KILLER or VW Case |
$36 |
