IPP Home Page
Home l Hot Products l Machining l Newsletter l Contact Us
 
Crane Cams - Performance Digital Nitrous Control
Digital Nitrous Control
 
So how does it work?
Dry manifold systems eliminate problems with fuel puddling and uneven distribution that would be caused by injecting liquid fuel into a manifold not designed for this purpose. Dry manifold systems do not include a separate fuel injection nozzle. Supplemental fuel is provided by increasing the fuel system pressure. This causes the rate of supplemental fuel flow to vary with RPM. However, nitrous oxide is injected at a fixed rate determined by a jet. Consequently, the ratio of nitrous to fuel flow varies with RPM. The engine tends to run lean at low RPM and rich at high RPM. This mismatch in nitrous/fuel ratio is an inherent limitation of dry manifold systems that rely on strictly mechanical means to control flow. The Crane DNC overcomes this limitation and also offers some important safety features.
 
Part #
6000-9816
Picture:
Features: • Engineered for dry manifold nitrous systems on late model E.F.I.
• Progressive nitrous control.
• Increased performance.
• Adjustable flow at start, full, and stop.
• 1st gear traction control.
• Automatic purge cycle.
• Use with NOSฎ Kit numbers 5120, 5122, 5123, 5124 and 5175.
Operating
Voltage
6 to 18 volts, reverse polarity protected, negative ground only
Tach Input 12 volt square wave. Compatible with most (for RPM sense) 2, 4, 6, and 8 cyl. engines including distributorless systems with wasted spark.
Nitrous
Solenoid Output
10 amps max. (protected against short circuits)
Dimensions 5”L x 2-3/4”W x 1”H.
1lb.
Price $269
Buy Now
 
Part #
9000-9805
Picture:
Features: • Engineered for dry manifold nitrous systems on late model E.F.I.
• Progressive nitrous control.
• Increased performance.
• Adjustable flow at start, full, and stop.
• 1st gear traction control.
• Automatic purge cycle.
• Use with NOSฎ Kit numbers 5120, 5122, 5123, 5124 and 5175.
Operating
Voltage
6 to 18 volts, reverse polarity protected, negative ground only
Tach Input 12 volt square wave. Compatible with most (for RPM sense) 2, 4, 6, and 8 cyl. engines including distributorless systems with wasted spark.
Nitrous
Solenoid Output
10 amps max. (protected against short circuits)
Dimensions 5”L x 2-3/4”W x 1”H. 1lb.
Price $299
Buy Now
 
 
 
 
 
 
 
 
 
 
 

Order/Tech Line: (603) 378-0090
Email: info@importperformanceparts.net


Thank You for visiting Import Performance Parts
*All prices on this site are subject to change without notice. Import Performance Parts™ disclaims responsibility for any printing or typographical errors, and does not guarantee that all information is accurate.


home |  FAQ |  contact us |  can't find a part? |  hot products |  links |  site map

Visit www.Tuner-World.com
Our HOT Import Enthusiast Site