|
OBD-1 Stage 1 Turbo
Kit
AA Tuning Stage I Turbo Kits
Performance - Stage 1
Power: 360 BHP @ 6800 rpm
Torque: 361 ft/lbs @ 3750 rpm
0-60mph: 4.8 sec
Top Speed: 150+ mph
1/4 mile: 12.7 sec
Turbo Boost: 7psi |
|
AATuning OBD-I Stage 1 Gen3 Turbo Kits
92-95 325i
1995 M3Super Car Performance without the Super Car cost!
Install the new
Generation3 Active Autowerke turbo system and feel the meaning of
Power. With 360BHP horsepower on a 1995 BMW E36 M3, there is a power
increase of 5 BHP over the Generation2, but the refinement of the
kit is not only 5BHP deep. See the comparative chart showing
differences between Generation 2 & 3.
The Generation3 turbo kit
is still a bolt on kit maintaining the civility of a daily driven
car. Refinement in maintaining precise boost control settings, and
less compressor surge are just some of the advantages of
Generation3.
The AA Turbo system comes
complete with a custom TD06 turbo with a HKS external wastegate, a
cast turbo manifold with high nickel content for strength, larger
front mounted intercooler, all mandrel bent piping with silicone
high temp hoses and stainless steel clamps, HKS racing by pass
valve, low restriction air filter, 6 hi-flow fuel injectors, custom
software programming, and a illustrated directional manual for
installation.
Generation 3
vs. Generation 2 Comparison
AA Stage I '95 M3 E36 Turbo Kit |
| Description |
Generation 2 Stage 1 |
Generation 3 Stage 1 |
| Cost |
n/a |
$8599 |
| Turbocharger |
Stage I |
Stage II (larger) |
| Intercooler |
Stage I |
Stage II (larger) |
| Piping |
Steel mandrel bent/powder coated |
Aluminum mandrel bent/polished |
| Intake Pipe diameter |
2.5 inches |
3.0 inches |
| By-pass valve |
Bosch by-pass valve |
HKS Blow-off valve (larger) |
| Fuel Injector |
Bosch larger than stock |
Bosch - larger than Gen2 |
| Software Upgrade |
AA Tuning/Bosch |
AA Tuning/Bosch |
| Wastegate |
Interval swing valve unit |
HKS external wastegate with plumbing from
turbo |
With the AA Turbo System
installed, appearance of a turbo is basically undetected. Only the
repositioning of the air intake and a front mounted intercooler is
evident. You maintain that factory like appearance.
Highlights:
Specially prepared turbocharger with external wastegate
Low restriction air filtration system
Custom front mounted intercooler
Custom cast niresist exhaust manifold
custom software programming with larger injectors
Polished aluminum mandrel bent tubing with hardware
Large 3" intake with CNC elbow
Large HKS Blow-off valve
Turbo system in kit form
Instruction Manual
Price: $8599
Call to Order: (603) 378-0090 |
