Mitsubishi Stroker Kits at Import Performance Parts

Home l Hot Products l Machining l Newsletter l Contact Us

Stroker Kits:
Mitsubishi 6G72

Our stroker kit increases torque as much as 30% and 45 Horse Power!*

What is our Stroker Kit?
It's 6.5mm more stroke that when added to the increased bore equals 345cc more cubes of usable power!
Our stroker kit increases torque as much as 30% and 45 Horse Power*. This means more pulling and launching power. This can be used with factory FI or Turbos (adjustments in fuel supply may be needed)
* Much more can be achieved with other HP increasing accessories

DARE TO COMPARE:
Mitsubishi's Bare Stock Short Block VS. IPP's Stroker Kit Short Block
With Ours You save $550!
Mitsubishi offers a Bare Stock Short Block for $3450. Compare that to our Stroker Kit Short Block which gives you an additional 30% HP for $2899. You get 30% more HP for $550 less!

(Pic of R22 Kit)
6G72 is V6 and will have 6 rods/pistons.
-----------------------------------------
Your engine before & after!
With Original CC's = 2972cc's
w/new Crank & .030 over = 3280
w/new Crank & .050 over = 3310
(that's a 345cc @.050 increase!)

Mitsubishi 6G72 Stroker Kits consist of:

IPP Forged Crank (93 & up)
Stock Stroke (2.992", 76mm)
New Stroke (3.242", 82.5mm)

Custom Forged Pistons (any compression & diameter)

Forged Steel Pins (ultra-lites available)

Piston Pin Locks

Plasma Moly Racing Rings

4340 H-Beam Rods (aftermarket)

Toga Performance Main & Rod Bearings

Comes balanced

Additional Options Available:
1. Ultra Lite Pins. Add $150
2. Knife-Edging. Reduces weight by up to 5 lbs! Add $299
3. Forged Billet Pauter Rods. Add $699